
Side by Side
| Quartz | Granite | |
|---|---|---|
| What it is | Engineered: ground quartz bound with resin and pigment | Natural stone cut from a quarry |
| Look | Even color and pattern, slab to slab | Every slab is different |
| Sealing | Never | Periodically, as the fabricator advises |
| Stains | Very resistant | Resistant once sealed |
| Heat | Use trivets: high heat can mark the resin | Takes hot pans well |
| Chips and repairs | Hard to chip; repairs blend well | Hard; chips can be filled |
What it is
- Quartz
- Engineered: ground quartz bound with resin and pigment
- Granite
- Natural stone cut from a quarry
Look
- Quartz
- Even color and pattern, slab to slab
- Granite
- Every slab is different
Sealing
- Quartz
- Never
- Granite
- Periodically, as the fabricator advises
Stains
- Quartz
- Very resistant
- Granite
- Resistant once sealed
Heat
- Quartz
- Use trivets: high heat can mark the resin
- Granite
- Takes hot pans well
Chips and repairs
- Quartz
- Hard to chip; repairs blend well
- Granite
- Hard; chips can be filled
Consumer Reports, which has stained, cut and scorched more than a dozen countertop materials in its labs, found that hot pots, serrated knives, abrasive pads and most stains were no match for quartz. Quartz makers still tell owners to use trivets, because the resin that binds the stone doesn't like direct high heat.
What They Cost
These are published national ranges, not our prices. In practice, entry-level granite is often a little cheaper than entry-level quartz, and mid-grade options of each overlap.
- Granite, typical kitchen job
- $2,000 – $4,000
- Average about $3,250 (HomeAdvisor, 2026)
- Granite slab material
- $40 – $60 per sq ft
- Before fabrication and install (HomeAdvisor)
- Quartz, installed
- $74 – $99 per sq ft
- Thumbtack
- Quartz material only
- $54 – $72 per sq ft
- Thumbtack
Market ranges from HomeAdvisor and Thumbtack cost guides, checked November 2026. Not a quote.
What moves either price most is the slab itself, then the fabrication: edge profile, sink and cooktop cutouts, mitered edges and waterfall ends. Rare granites and designer quartz patterns both cost well above the averages.
Which One Fits Your Kitchen?
Pick quartz if
- You want a consistent white or a marble look without marble's care.
- You'd rather never think about sealing.
- The counters see coffee, wine, tomato sauce and kids every day.
Pick granite if
- You want a one-of-a-kind natural slab with real movement.
- You cook a lot and set hot pans down without thinking.
- You don't mind sealing the stone now and then.
There's also quartzite, a natural stone that looks like marble but is much harder. It needs sealing like granite. Be careful with labels: some stone sold as quartzite is softer and can etch. See our countertop installation page for how the materials compare.
Silica Dust and Who Cuts the Stone
Cutting and grinding stone countertops releases crystalline silica dust, which can cause the lung disease silicosis in the workers who breathe it. OSHA and NIOSH have warned the countertop industry about it since 2015, and updated that hazard alert in 2026.
Engineered quartz has the most silica: the 2015 alert put it at over 93%, against 10% to 45% for granite, though the 2026 update notes some newer engineered stone is under 50%. The risk is in fabrication, not in using the finished counter. That's why most cutting belongs at a shop with water and dust controls, not in your kitchen.
Questions to Ask Before You Buy
- Can I see the full slab, not just a sample, before it's cut?
- Where will the seams fall, and how will the pattern line up across them?
- Is the price for 2 cm or 3 cm thickness?
- Are the sink cutout, faucet holes and edge profile included?
- Is cutting done at the shop with water or dust controls?
Asked often
Quartz vs Granite Questions
Is quartz or granite more expensive?
It depends on the slab. Entry-level granite is often slightly cheaper than entry-level quartz, mid-grade options overlap, and rare granites and designer quartz both go well above average.
Can you put hot pans on quartz?
Quartz makers recommend trivets. The stone itself handles heat, but direct high heat can discolor the resin that binds it. Granite handles hot pans better.
Does granite need to be sealed?
Yes, now and then. Granite is porous, and sealing keeps liquids from soaking in. How often depends on the stone, so ask your fabricator.
Which is better for resale in Dallas?
Both read as premium to buyers. Most buyers care more that the counters are stone and in good condition than which stone it is.
Is quartz bad for your health?
No. The silica risk is to workers cutting and grinding it without dust controls. A finished, installed quartz counter doesn't release silica.
Sources
- Consumer Reports, countertop buying guide and best countertops for busy kitchens
- HomeAdvisor, How Much Do Granite Countertops Cost in 2026?
- Thumbtack, How much are quartz countertops?
- OSHA and NIOSH, Worker Exposure to Silica during Countertop Manufacturing, Finishing and Installation (2015; updated 2026, as reported by AIHA, March 5, 2026)