CM Kitchen Remodeling & Installation Dallas
Glossy handmade white tile backsplash behind a range with a brass pot filler and a plaster range hood

Backsplash installation

Backsplash Installation in Dallas, TX

The backsplash is the wall people look at most, and the one where sloppy cuts show first. We set tile tight to the counter, cut it clean around every outlet and window, and finish the ends so the edges look intended.

  • Tile or stone slab
  • Clean outlet cuts
  • Finished edges

Get Your Free Estimate

Three quick fields. We call you back to set up a visit to your kitchen.

Or call (469) 352-9893

Backsplash

What Goes Into a Good Backsplash?

A kitchen backsplash protects the wall behind the counters and the range from water, grease and splatter. It's also the biggest stretch of tile most people put in their home, so it sets the look of the kitchen.

Most of the work is in the layout. Where the pattern starts, how it meets the counter, where cut pieces land around windows and outlets, and how the tile stops at the ends decide whether it looks built-in or added on.

In Dallas kitchens we install everything from classic white subway tile to glossy handmade zellige, large porcelain panels and full-height stone slab that matches the counters.

Tile by tile

Which Backsplash Material Fits Your Kitchen?

Each material changes how the wall looks and how much care it needs. This is how the common choices compare.

Comparison of ceramic, zellige, porcelain, natural stone and slab backsplash materials
MaterialLookCareGood to know
Ceramic subwayClean and classicWipes cleanGrout color changes the look a lot
ZelligeGlossy, uneven, handmadeSeal the tile and groutNo two tiles match, which is the point
PorcelainLarge, quiet panelsWipes cleanFewer grout lines to scrub
Natural stoneMarble or travertine textureSeal it now and thenAcidic splatter can etch marble
Stone slabOne piece, matches the counterSame as the counterSeamless behind the range
Close-up of glossy white zellige tile meeting a white counter, with sage green cabinets and brass cup pulls below

The layout

Why Backsplash Layout Matters More Than the Tile

The same tile can look custom or cheap depending on where the cuts fall. We center the pattern on the range or the window, so the cut pieces at the ends match on both sides, instead of starting in a corner and ending with a sliver.

Outlets are another giveaway. Box extenders bring them out to the face of the tile so covers sit flat, and we plan the layout so outlets land in full tiles where we can.

Details we plan before setting tile

  • Where the pattern is centered.
  • How the tile stops at open ends: a trim piece or a finished edge.
  • Outlet and switch placement in the layout.

What's included

What Goes Into a Backsplash Install?

Every backsplash job covers the wall prep, the layout, the setting and the finish.

  • Wall Prep

    Old tile removed, the wall patched and flattened so the new tile sits even.

  • Layout

    The pattern is centered and the cut pieces planned before the first tile goes up.

  • Setting and Grout

    Tile is set tight to the counter, then grouted and cleaned.

  • Outlets and Edges

    Outlets are extended to sit flush and the ends get a finished edge.

Material board with handmade white zellige tiles, a white quartz sample, an emerald cabinet door and a brass knob

How it works

How a Backsplash Installation Works

A backsplash goes in after the counters, so it can sit right on top of them.

  1. Step 1: Pick the Tile

    We bring samples and help you choose the tile, pattern and grout color.

  2. Step 2: Measure and Plan

    We measure the walls and lay out the pattern on paper first.

  3. Step 3: Set the Tile

    Tile goes up row by row, with cuts made around outlets and windows.

  4. Step 4: Grout and Clean

    Grout is packed, the tile cleaned and caulk run where tile meets counter.

Getting it right

What Separates a Good Backsplash From a Bad One

Most backsplash problems are visible from across the room. These are the details we spend the time on.

  • Matching End Cuts

    The pattern is centered so the ends match instead of one sliver.

  • Caulk, Not Grout, at the Counter

    The joint at the counter moves, so it gets flexible caulk that won't crack.

  • Flush Outlet Covers

    Box extenders bring outlets to the tile face so covers sit flat.

Cost

What Does a Backsplash Cost?

Backsplash prices depend on the square footage of wall, the tile itself and the pattern. Small tiles and herringbone take longer to set than large tiles in a stacked pattern.

Removing old tile, running it full height or cutting around a window adds to it. We measure the walls and price the job once you've picked the tile.

Kitchen remodel cost in Dallas

What moves the price

  • Square feet of wall
  • Tile material
  • Pattern
  • Old tile removal

What's changing in your kitchen?

Your kitchen plan

2 changes, which means a licensed plumber and a licensed electrician under Texas law.

  • New countertops

    Stone and quartz tops are templated after the base cabinets are set, then cut at the shop and installed. The sink and cooktop go back in after.

    Permits: Countertops alone rarely need a permit. Reconnecting the sink is plumbing, which Texas licenses through the State Board of Plumbing Examiners.

  • Backsplash tile

    Tile goes up after the counters are in, so it can sit tight to the top. Outlets in the backsplash get box extenders.

    Permits: Tile on its own usually needs no permit. Moving or adding outlets is electrical work, which Dallas requires a licensed electrician to do.

Your city or town's building department makes the final call on permits. We confirm the list at the estimate.

Related services

Other Kitchen Work We Do

A backsplash usually comes with new counters. These jobs go with it.

  • White quartz waterfall island with soft gray veining under three pendant lights

    Quartz & Granite Countertops

    The counters the tile sits on.

    • Quartz and granite
    • Templated on site
  • Kitchen with refaced white oak cabinet doors, slim black pulls and a bay window over the sink

    Cabinet Refacing

    New cabinet fronts to go with the new tile.

    • Keeps the layout
    • Same boxes, new look
  • Kitchen floor plan on a table with green, white and oak cabinet door samples, quartz samples and a tape measure

    Kitchen Design

    Help picking tile, counters and finishes together.

    • Measured layout
    • Material samples

Where we work

Backsplash Installation Across Dallas and the Suburbs

We install kitchen backsplashes in Dallas and these cities.

Asked often

Backsplash Installation Questions

Should the backsplash go up before or after the countertops?

After. The tile sits on top of the counter, so the counters go in first and the backsplash is set tight to them.

How high should a kitchen backsplash go?

The standard is the 18 inches between the counter and the upper cabinets. Many people run it to the ceiling behind the range or on walls with no uppers.

Can you tile over my old backsplash?

Sometimes, but we usually remove it. Tiling over old tile pushes the new face out past the counter edge and outlets.

Do I need a permit for a backsplash?

Tile by itself usually doesn't need one in Dallas. Moving or adding outlets is electrical work for a licensed electrician.

What grout color should I pick?

Grout that matches the tile makes the wall read as one surface. A contrasting grout shows off the pattern. We bring grout samples to hold against your tile.

Free in-home estimate

Get a Free Backsplash Estimate

Tell us which walls and the tile you have in mind. We'll measure and bring samples to the visit.

  • Free in-home estimate
  • Your kitchen measured in person
  • A written scope before any work starts

Tell Us About Your Kitchen

Or call (469) 352-9893

Call