
Custom kitchen cabinets
Custom Kitchen Cabinets in Dallas, TX
Cabinets made for your kitchen instead of a catalog's: sized to your walls, run to your ceiling and finished in the color you pick. We design them, order them and install them, so the doors line up and the counters sit flat.
- 4925 Greenville Ave #290, Dallas
- (469) 352-9893
- Built to your measurements
- Painted or stained
- Full installation
- Free In-Home EstimatesWe measure your kitchen in person.
- Design to InstallOne team from the first sketch to the last pull.
- Permits PlannedWe list the permits your city needs up front.
- Open 24 HoursCall or send the form any time, any day.
Custom cabinets
What Makes a Kitchen Cabinet Custom?
A custom cabinet is built to the exact size of the space it fills, not picked from a list of standard widths. The boxes, doors and drawers are made to order, so there are no filler strips to hide gaps and no wasted inches at the ends of a run.
Stock cabinets come in 3-inch steps and a few finishes. Semi-custom adds more sizes and colors. Custom lets you choose the door style, the wood or paint, the box depth and the height of every cabinet, including uppers that run all the way to a 9- or 10-foot ceiling.
In Dallas we see custom cabinets most in older homes with walls that aren't square and in newer two-story homes with tall ceilings, where standard uppers stop short and leave a dust shelf above them.

Storage that fits
Plan the Inside, Not Just the Doors
Most of what makes a kitchen easy to use is behind the doors. Deep drawers for pots beat lower cabinets with shelves. A pull-out pantry by the fridge keeps dry goods in reach. A narrow cabinet by the range holds sheet pans upright.
We plan the inside of each cabinet at the design stage, when it costs nothing to change. Once the boxes are built, moving a drawer means a new cabinet.
Inserts people ask for most
- Pull-out pantry or tall pantry with roll-out shelves.
- Deep pot drawers in place of base cabinet shelves.
- Trash and recycling pull-out next to the sink.
- Tray dividers above the oven or range.
Stock, semi-custom or custom
How the Three Kinds of Cabinets Compare
All three can look good once they're installed. The difference is how closely they fit your room and how much you can change.
| Stock | Semi-custom | Custom | |
|---|---|---|---|
| Sizes | Set widths in 3-inch steps | More widths and depths | Any size the space needs |
| Finishes | A short list | A wider range | Any paint or stain |
| Fit in older homes | Filler strips at the ends | Fewer fillers | Scribed to the wall |
| Ceiling height | Uppers stop short | Some taller uppers | Run to the ceiling |
| Lead time | Shortest | Longer | Longest |
Lead times change with the season and the cabinet maker. We give you a date when the order is placed.
What's included
What Goes Into a Custom Cabinet Install?
Custom cabinets only look custom if they go in right. Every cabinet job covers these four parts.
Field Measuring
Every wall, window, outlet and pipe is measured in the room before the order goes in.
Shop Drawings
You sign off on a drawing of every cabinet, door and drawer before anything is built.
Level Setting
Boxes are shimmed level even when the slab isn't, so counters sit flat.
Doors and Hardware
Hinges are adjusted so gaps are even, then pulls and knobs go on.

How it works
How a Custom Cabinet Job Runs
Most of the time on a cabinet job is spent before install day, getting the drawings right.
Step 1: Kitchen Visit
We measure the room, talk through how you cook and show door and finish samples.
Step 2: Layout and Drawings
You get a cabinet layout and drawings to mark up until every box is right.
Step 3: Build
The cabinets are built and finished to the drawings while the old kitchen stays in use.
Step 4: Install
Old cabinets come out, new ones go in level, then counters are templated.
Why custom
When Custom Cabinets Are Worth It
Custom isn't the answer for every kitchen. These are the rooms where it makes the biggest difference.
Walls That Aren't Square
Cabinets scribed to a wavy plaster wall close the gap that stock boxes leave.
Tall Ceilings
Uppers that reach a 9- or 10-foot ceiling add storage and lose the dust shelf.
Odd Corners and Angles
Angled walls and short runs get cabinets sized to them, not fillers.
Cost
What Do Custom Kitchen Cabinets Cost in Dallas?
Cabinets are usually the biggest line in a kitchen budget. The price depends on how many linear feet of cabinets you need, the wood or paint, the door style and the inserts inside.
Inset doors and painted finishes cost more than full-overlay stained doors. Tall uppers, glass doors and pull-outs add to it. We price your cabinets after we've measured the room and you've seen a layout.
Kitchen remodel cost in DallasWhat moves the price
- Linear feet of cabinets
- Door style and overlay
- Wood and finish
- Pull-outs and inserts
What's changing in your kitchen?
Your kitchen plan
2 changes, which means a licensed plumber under Texas law.
New cabinets
The old boxes come out, the walls and floor are checked for level, and the new cabinets are set, shimmed and fastened.
Permits: Swapping cabinets in the same layout is usually treated as cosmetic work. Changing the layout can bring in plumbing or electrical permits.
New countertops
Stone and quartz tops are templated after the base cabinets are set, then cut at the shop and installed. The sink and cooktop go back in after.
Permits: Countertops alone rarely need a permit. Reconnecting the sink is plumbing, which Texas licenses through the State Board of Plumbing Examiners.
Reface the cabinets
The cabinet boxes stay. New doors and drawer fronts go on, and the frames and end panels get a matching veneer.
Permits: Refacing is cosmetic work and doesn't usually need a permit in Dallas or the suburbs.
Backsplash tile
Tile goes up after the counters are in, so it can sit tight to the top. Outlets in the backsplash get box extenders.
Permits: Tile on its own usually needs no permit. Moving or adding outlets is electrical work, which Dallas requires a licensed electrician to do.
Add an island
The island is laid out against walkways and appliance doors, then built on the floor and anchored.
Permits: An island with a sink or outlets needs plumbing and electrical permits, pulled by the licensed trades doing the work.
Move the sink or range
Moving a sink, dishwasher or gas range means new supply, drain, vent or gas lines run through the walls or the slab.
Permits: Plumbing and gas lines need a permit and a Texas-licensed plumber. Many Dallas homes sit on a slab, so moving a drain can mean cutting concrete.
Open or move a wall
We find out first whether the wall carries load. A bearing wall needs a beam sized for the span before it comes out.
Permits: Removing or moving a wall needs a building permit, and a load-bearing wall usually needs engineered plans.
Home built before 1978
Painted trim, plaster and old cabinets can hold lead paint, so painted surfaces are tested before demolition.
Permits: The EPA's lead rule, which the EPA runs in Texas, covers paid work that disturbs more than 6 square feet of paint inside a pre-1978 home.
Your city or town's building department makes the final call on permits. We confirm the list at the estimate.
Related services
Other Kitchen Work We Do
New cabinets usually mean new counters. These are the jobs that go with them.

Quartz & Granite Countertops
Stone tops templated once the new boxes are set.
- Quartz and granite
- Templated on site


Cabinet Refacing
New doors on your boxes if the layout already works.
- Keeps the layout
- Same boxes, new look
Where we work
Custom Cabinets Across Dallas and the Suburbs
We design and install custom kitchen cabinets in Dallas and these cities.
Asked often
Custom Kitchen Cabinet Questions
Do you install cabinets I bought somewhere else?
Yes. We install cabinets you've ordered elsewhere, as long as they arrive complete. We check every box against the order before we start.
Can new cabinets go to the ceiling?
Yes. Custom uppers can run to 9- and 10-foot ceilings, or a stacked upper with glass can fill the top. It ends the dust shelf above standard uppers.
Painted or stained cabinets?
Painted cabinets give you any color. Stained wood shows the grain and hides small dings better. Many Dallas kitchens now mix both, with painted perimeter cabinets and a stained island.
How long do custom cabinets take?
Most of the wait is the build, which runs for weeks. The install itself usually takes days. We give you dates when the order is placed, and our guide covers how long a kitchen remodel takes.
Can I keep my kitchen while the cabinets are built?
Yes. The old kitchen stays in place until the new cabinets are ready to install, so you only lose the kitchen for the install and counters.
Free in-home estimate
Get a Free Custom Cabinet Estimate
Tell us about your kitchen and what isn't working. We'll measure the room and bring door samples to the visit.
- Free in-home estimate
- Your kitchen measured in person
- A written scope before any work starts