
Cabinet refacing
Cabinet Refacing in Dallas, TX
If your cabinet boxes are solid and the layout works, you don't need new cabinets to get a new-looking kitchen. Refacing replaces the doors and drawer fronts, covers the frames and end panels to match, and swaps the hardware.
- 4925 Greenville Ave #290, Dallas
- (469) 352-9893
- Keeps your layout
- New doors and fronts
- Matching veneer
- Free In-Home EstimatesWe measure your kitchen in person.
- Design to InstallOne team from the first sketch to the last pull.
- Permits PlannedWe list the permits your city needs up front.
- Open 24 HoursCall or send the form any time, any day.
Refacing
What Is Cabinet Refacing?
Cabinet refacing is replacing the parts of your cabinets you can see while keeping the boxes behind them. New doors and drawer fronts go on, the face frames and exposed sides are covered with a matching veneer or laminate, and new hinges and pulls finish it.
Because the boxes stay, so does the layout, and so do the countertops if you like them. There's no demolition, so the kitchen stays usable for most of the job.
Refacing suits the many Dallas and Plano kitchens from the 1980s and 1990s with sturdy plywood or hardwood boxes and dated oak doors. It doesn't fix a layout that doesn't work. If the problem is the layout, new cabinets are the better spend.
Reface, refinish or replace
Refacing vs Painting vs New Cabinets
There are three ways to change how your cabinets look. Which one fits depends on the boxes and the layout.
| Refinish or paint | Reface | Replace | |
|---|---|---|---|
| Doors and fronts | Same doors, new finish | New doors and fronts | All new |
| Door style | Stays the same | Any style | Any style |
| Cabinet boxes | Stay | Stay, covered to match | New |
| Layout | Stays the same | Stays the same | Can change |
| Relative cost | Lowest | Middle | Highest |
We look inside your cabinets at the visit. Water damage under the sink or sagging shelves can mean a box or two needs replacing even on a refacing job.

On the job
What Refacing Day Looks Like
The old doors come off and get stacked out of the way. The frames are cleaned and sanded so the new veneer bonds, then each frame and end panel is covered and trimmed.
New doors and drawer fronts go on with new hinges, usually soft-close, and are adjusted so the gaps are even. Pulls go on last. Swapping a sink base or adding a pull-out can happen at the same time.
Easy add-ons while the doors are off
- Soft-close hinges and drawer slides.
- Crown molding on the uppers.
- A pull-out trash or roll-out shelves in base cabinets.
What's included
What Goes Into a Refacing Job?
Refacing done well is hard to tell from new cabinets. These four parts are what make that happen.
Box Inspection
Every box is checked for water damage and loose joints before anything is ordered.
Door Measuring
Each opening is measured for its new door and drawer front.
Frame Veneer
Face frames and end panels are covered and trimmed to match the doors.
Hinges and Hardware
New hinges, adjusted for even gaps, then pulls and knobs.

How it works
How Cabinet Refacing Works
Refacing has a short install because the slow part, making the doors, happens off site.
Step 1: Kitchen Visit
We check the boxes, measure the openings and show door styles and finishes.
Step 2: Pick Doors and Finish
You choose the door style, finish and hardware from samples.
Step 3: Doors Are Made
Doors and fronts are made to the measurements while you use the kitchen.
Step 4: Refacing
Frames are veneered, doors hung and adjusted, and hardware installed.
Why reface
When Refacing Makes Sense
Refacing is a strong choice when the bones of the kitchen are good. Drag the slider to see how much new doors and counters can change a room.


Solid Boxes
Plywood or hardwood boxes from the '80s and '90s are often worth keeping.
A Layout That Works
If the sink, range and fridge are where you want them, keep them there.
Less Disruption
No demolition and no new plumbing, so the kitchen stays usable.
Cost
What Does Cabinet Refacing Cost in Dallas?
Refacing is priced by the size of the kitchen, usually by the linear foot of cabinets, plus the number of doors and drawer fronts. Real wood veneer costs more than laminate or thermofoil.
Add-ons like soft-close hinges, crown molding, new pulls and pull-outs add to it. Our cost guide has published Dallas ranges, and we price your kitchen after counting the doors.
Kitchen cabinet refacing costWhat moves the price
- Linear feet of cabinets
- Number of doors and fronts
- Veneer or door material
- Add-ons and hardware
What's changing in your kitchen?
Your kitchen plan
2 changes, which means a licensed plumber under Texas law.
New cabinets
The old boxes come out, the walls and floor are checked for level, and the new cabinets are set, shimmed and fastened.
Permits: Swapping cabinets in the same layout is usually treated as cosmetic work. Changing the layout can bring in plumbing or electrical permits.
New countertops
Stone and quartz tops are templated after the base cabinets are set, then cut at the shop and installed. The sink and cooktop go back in after.
Permits: Countertops alone rarely need a permit. Reconnecting the sink is plumbing, which Texas licenses through the State Board of Plumbing Examiners.
Reface the cabinets
The cabinet boxes stay. New doors and drawer fronts go on, and the frames and end panels get a matching veneer.
Permits: Refacing is cosmetic work and doesn't usually need a permit in Dallas or the suburbs.
Backsplash tile
Tile goes up after the counters are in, so it can sit tight to the top. Outlets in the backsplash get box extenders.
Permits: Tile on its own usually needs no permit. Moving or adding outlets is electrical work, which Dallas requires a licensed electrician to do.
Add an island
The island is laid out against walkways and appliance doors, then built on the floor and anchored.
Permits: An island with a sink or outlets needs plumbing and electrical permits, pulled by the licensed trades doing the work.
Move the sink or range
Moving a sink, dishwasher or gas range means new supply, drain, vent or gas lines run through the walls or the slab.
Permits: Plumbing and gas lines need a permit and a Texas-licensed plumber. Many Dallas homes sit on a slab, so moving a drain can mean cutting concrete.
Open or move a wall
We find out first whether the wall carries load. A bearing wall needs a beam sized for the span before it comes out.
Permits: Removing or moving a wall needs a building permit, and a load-bearing wall usually needs engineered plans.
Home built before 1978
Painted trim, plaster and old cabinets can hold lead paint, so painted surfaces are tested before demolition.
Permits: The EPA's lead rule, which the EPA runs in Texas, covers paid work that disturbs more than 6 square feet of paint inside a pre-1978 home.
Your city or town's building department makes the final call on permits. We confirm the list at the estimate.
Related services
Other Kitchen Work We Do
Refacing often goes with new counters and tile, to finish the new look.

Quartz & Granite Countertops
New stone tops on the boxes you're keeping.
- Quartz and granite
- Templated on site


Where we work
Cabinet Refacing Across Dallas and the Suburbs
We reface kitchen cabinets in Dallas and these cities.
Asked often
Cabinet Refacing Questions
Is refacing cheaper than new cabinets?
Usually, yes, because the boxes stay and there's no demolition. Our guide covers kitchen cabinet refacing cost with published ranges.
Can I change the door style when refacing?
Yes. Raised-panel oak doors can become shaker, slab or inset-look doors. Only the boxes and layout stay the same.
Will refacing work on particleboard cabinets?
It depends on their condition. Swollen or crumbling particleboard, often under the sink, won't hold new hinges well. We check every box at the visit.
Can I keep my countertops?
Yes, if you like them. The doors and frames can be refaced with the counters in place.
Can I add cabinets while refacing?
Yes. New boxes, like a pantry or an extra upper, can be built to match the refaced cabinets.
Free in-home estimate
Get a Free Cabinet Refacing Estimate
Tell us roughly how many cabinets you have and the look you want. We'll check the boxes and bring door samples.
- Free in-home estimate
- Your kitchen measured in person
- A written scope before any work starts